900mm Dual Use Multifunctional Obstetrics Hospital Baby Crib

900mm Dual Use Multifunctional Obstetrics Hospital Baby Crib

Product Description

Design
The bed frame is formed by sheet metal bending and welding, which reduces the dead angle of the plastic spraying and makes the product more beautiful.
Plastic
Environmental plastic can be sterilized in 100°C, tensile upton 30MPa
Virgin ABS material.
Steels | Painting
ASTM testing anti-baterial, paint thickness 0.12 mm, brightness 60°, paint can resist 50 kg impact.
Welding
Panasonic robotic ensure, 360° full smooth wedlding.
Hand Control
The Bed With Two Function, Controlled By manual cranks.
Platform
The concave vent hole design of the plastic spray bed panel has strong air permeability and can effectively prevent bedsores. The bed panel is connected by sheet metal connectors, which is more convenient for assembly..
Guardrail
Adopt aluminum alloy liftable guardrail,the distance between the protective tubes is less than 8 cm, and there are 3 gears to adjust the height, anti-pinch hands to protect children's safety.
Head & Foot Board
The bed ends are integrally formed by PP blow molding, which is warm and beautiful and can effectively protect the bed and the patient from colliding with the wall.
Castors
5"silent casters, each with independent brakes.
Drainage Hooks
Mobile plastic drainage hooks.
IV Pole
Full SS IV pole, bearing 15kg.
Shoes Holder
Utility holder & Shoes holder.
The color is warm and comfortable. The fence-type movable switch on both sides can be adjusted by stages to effectively prevent children from accidentally getting out of bed.
Specification:
1900*900*1270mm

Bed size: 1770*705 mm, bed height from ground: 670 mm

Casters: diameter 125, 4 are brake wheel back upward tilt angle: 66 leg upward tilt angle: 26.

Guardrail size: 1770*570mm

Three gears adjustable: first gear (off the ground): 60mm, second gear (off the ground): 300mm, third gear (off the ground): 520mm